Gsm Panda

Go Back   Gsm Panda > Product Support Sections > Special Solutions / Services / WebShop > GPGIndustries Support section > Dragon Box
Dragon Box GPG Dragon Box support forum

Thread Closed 
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-04-2013, 17:14   #11 (permalink)
Administrator
 
M.Irfan's Avatar
 
Join Date: Jul 2013
Posts: 1,549
Status: Offline
Thanks: 63
Thanked 582 Times in 464 Posts
Rep Power: 8
M.Irfan is on a distinguished road
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Unsupport CPU, Please select another boot and retry again!

just change the boot ver to 3.952

__________________
Best Regard,
M.Irfan
 
Old 08-04-2013, 17:15   #12 (permalink)
Administrator
 
M.Irfan's Avatar
 
Join Date: Jul 2013
Posts: 1,549
Status: Offline
Thanks: 63
Thanked 582 Times in 464 Posts
Rep Power: 8
M.Irfan is on a distinguished road
about the DM DP in the SPD 6600L PCB

Today have one gpgdragon user connect my msn
talk with me,
this mobile is SPD WT6228,is New CPU,use the P-08A(mini USB)
i run the gpgdragon software,select 6600L-COM and 6600L-USB
but can't working,can't pinfind
he is very good and help me open the mobile
check the mobile have 5 connect pin
have DM and DP,what is it
is same like USB+ and USB-
use the RJ45 connect to mobile PCB
and connect to BOX rj45
working 100%
but have one i can't sure,is WT6228 or no?
the CPU can check it,if who have WT6228 CPU if you can help me check can it run in the gpgdragon is very good for gpgdragon user
thanks
__________________
Best Regard,
M.Irfan
 
Old 08-04-2013, 17:15   #13 (permalink)
Administrator
 
M.Irfan's Avatar
 
Join Date: Jul 2013
Posts: 1,549
Status: Offline
Thanks: 63
Thanked 582 Times in 464 Posts
Rep Power: 8
M.Irfan is on a distinguished road
if software only read info and did not do any thing else please read it
Quote:
i already face same problem
solution ,
delete/uninstall current gpgdragon software
re-download from support and install it
if this not solve
just restore your pc and download and install it again
your problem 100% solve
Br
Br
__________________
Best Regard,
M.Irfan
 
Old 08-04-2013, 17:15   #14 (permalink)
Administrator
 
M.Irfan's Avatar
 
Join Date: Jul 2013
Posts: 1,549
Status: Offline
Thanks: 63
Thanked 582 Times in 464 Posts
Rep Power: 8
M.Irfan is on a distinguished road
Nor Flash ID: 0000000000000000 Nand Flash ID: 0000000000000000 Nor Flash not found.


Bad Flash Chip ,just rehot or change this problem solved


Code:
Initializing... DA_LIB_VER_2.5.1.2 It is sensing the pinout fast,please hold on the phone Power key RXD=19 TXD=20 Connecting...Please hold on the POWER key until the red gauge is going... BB:6225, HardwareVer:8A05, SoftwareVer:8A00 Set RTC Alarm Mask failed, REG=0x802100100
Low Power Problem , Need To Keep Power Button For Long Time

Code:
Nor Flash ID: 0098000300000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Get Project ID from phone... Project ID: M.RK3230436.M28202.V1.1.0.0M1226 Changing baudrate to 921600... Done. Reading full Flash... CRC error: CRC=4C92, CheckSum16=4C8A
in this moments Need to Fst format the set Then Read Write flash will work

Code:
Read info is done. CPU: SC6600R Flash: NAND_H8BCS0PG0MBP Set FLASH Parameters... Settings have been completed! Reading FileSystem info... Failed to read FS info.
Need To full flash the Set


Checking box, wait...
Box Firmware version: 1.43
Warning: requires firmware version 1.52, or higher...
Device not found


Need to update the box fimware To latest one v1.52 updater of firmware you can find on v2.01 folder
__________________
Best Regard,
M.Irfan
 
Old 08-04-2013, 17:18   #15 (permalink)
Administrator
 
M.Irfan's Avatar
 
Join Date: Jul 2013
Posts: 1,549
Status: Offline
Thanks: 63
Thanked 582 Times in 464 Posts
Rep Power: 8
M.Irfan is on a distinguished road
Error: Your software has been restricted.


Advice : do not change your date , when ever you try to update your box firmware must check date and time , once you install your box and its working fine PLEASE make restore point , if you want to change date and time of your pc you can do but do not turn on GPGDRAGON software , when you want to use gpgdragon software set date and time back to normal then open it , also check your computer's mother board ( mainboard) cell inside , it must be good

strongly recommend to use
<<<< Error: Your software has been restricted. problem solved >>>>
__________________
Best Regard,
M.Irfan
 
Old 08-04-2013, 17:21   #16 (permalink)
Administrator
 
M.Irfan's Avatar
 
Join Date: Jul 2013
Posts: 1,549
Status: Offline
Thanks: 63
Thanked 582 Times in 464 Posts
Rep Power: 8
M.Irfan is on a distinguished road
how to work on gpgdragon with Avast !!








Br
__________________
Best Regard,
M.Irfan
 
Old 08-04-2013, 17:47   #17 (permalink)
Administrator
 
M.Irfan's Avatar
 
Join Date: Jul 2013
Posts: 1,549
Status: Offline
Thanks: 63
Thanked 582 Times in 464 Posts
Rep Power: 8
M.Irfan is on a distinguished road
Open AVG internet security




__________________
Best Regard,
M.Irfan
 
Old 08-04-2013, 17:55   #18 (permalink)
Administrator
 
M.Irfan's Avatar
 
Join Date: Jul 2013
Posts: 1,549
Status: Offline
Thanks: 63
Thanked 582 Times in 464 Posts
Rep Power: 8
M.Irfan is on a distinguished road
Mstar Driver Download


in some computer,Mstar after pinfind
computer tell you need install the driver


I-run the GPGDragon,
II-select Mstar and click the Start
III-after pinfind computer tip Install Driver

IV-Download the Mstar Driver and install(Like Spd Driver)


Click Download Mstar Driver:
__________________
Best Regard,
M.Irfan
 
Old 08-04-2013, 17:55   #19 (permalink)
Administrator
 
M.Irfan's Avatar
 
Join Date: Jul 2013
Posts: 1,549
Status: Offline
Thanks: 63
Thanked 582 Times in 464 Posts
Rep Power: 8
M.Irfan is on a distinguished road
problem :
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
Failed to format Flash...

Try With Diffrents BootsFrom list If Still Same Then Check With Hardware (rehot CPU,FlashChip)
__________________
Best Regard,
M.Irfan
 
Old 08-04-2013, 17:55   #20 (permalink)
Administrator
 
M.Irfan's Avatar
 
Join Date: Jul 2013
Posts: 1,549
Status: Offline
Thanks: 63
Thanked 582 Times in 464 Posts
Rep Power: 8
M.Irfan is on a distinguished road
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=19 D+=15
BOOT set failure, continue to scan...

its seems mobile have rx tx on board so check it and connect from rx tx points from board
also try to find out the boot key you can use # button 0 button etc
BR
__________________
Best Regard,
M.Irfan
 
Similar Threads
Thread Thread Starter Forum Replies Last Post
Nokia c5 All Solutions ..::R_J::.. Nokia Hardware & Hardware-Repair Area 0 08-04-2013 07:12
iPad 2 Hardware Solutions M.Irfan iPhone, iPad, iPod Hardware Repair 1 08-02-2013 21:08
Check hwk problems goto HWK Support 2 07-30-2013 16:45
Resolve GREEN LIGHT Problems M.Irfan Advance-Box 2 07-30-2013 16:27
symphony w30 pattern lock 100% Ok By GPG Dragon Trademark® Dragon Box 1 07-30-2013 09:44

Thread Closed 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes



All times are GMT +1. The time now is 05:34.


Copyright ©2013 - 2019 Gsm Panda
Registered trademark of vBulletin Solutions